USEPA Method 5 Basic Set
Meets or exceeds the following methods/laws/requirements:
US EPA Method 5:
Section 6.1 (Sample Collection) but excluding section 6.1.3: Gas Density Determination Equipment (Gas Analyzers) and chemicals (silica gel, deionized distilled water, ice, acetone)
Section 6.2 (Sample Recovery - except balances).
Product Description
Start isokinetic sampling (smoke-stack testing) using US EPA Method 5 (Particulate Matter or Dust) upon unpacking. This set uses Aer Sampling’s Standard Configuration where the full-length heating box—MKORTM Heater Box (Hot Box), the Box Extender (Riser Box) and the Impinger Box (Cold Box) is hung onto a monorail and move in or out the porthole of the chimney/stack, while traversing the smoke-stack.
N.A.
Product Specifications
Minimum porthole inside diameter needed: ~4 in. (10 cm)
Voltages:
100-127 V / 60 Hz --- S-48
220-240 V / 50 Hz --- S-28
Other Information
Consider buying additional glassware in case of accidental breakage during sampling.
Consider buying transport cases if you will be traveling too far from your main offices.
All our product sets come with a Guaranteed-Complete promise. And all our products come with a one-year warranty against manufacturing defects and one-month technical support for free. Please refer to our Frequently Asked Questions (FAQs) page for more details.
-----
Information presented here is subjected to Aer Sampling Group's terms and conditions.
In case of discrepancy between English version and the non-English version, the English version shall prevail.
Doc ID: AERHQWW-s-48-en
Last revised (Excluding prices): 0; 03.02.21
Catalog ID | Catalog/Product Name | Obsolete Catalog IDs |
S-48 | 100-127V USEPA Method 5 Basic Set | - |
S-28 | 220-240V USEPA Method 5 Basic Set | US-M5 |
-----
Bill of Materials (BOM)
What does this product contain? (r6/r13):
The following items are included. Click the Catalog ID below to view individual components of this product.
S/N | Catalog ID |
Quantity | Item Name |
1 | K-150 | x1 | Critical Orifice Kit [EACH] |
2 | K-151 | x1 | Double "L" Connector with Thermocouple Assembly Kit [EACH] |
3 | K-156 | x1 | Glass Filter Holder Kit, 3" [EACH] |
4 | K-157 | x1 | Glass Nozzles Kit [EACH] |
5 | K-164 | x1 | Nozzle Brush Kit [EACH] |
6 | K-171 | x1 | Greenburg Smith Impinger Insert Kit [EACH] |
7 | K-173 |
x3 | Plain Impinger Insert Kit [EACH] |
8 | K-180 | x1 | Cyclone Bypass, glass, with o-ring Kit [EACH] |
9 | K-182 |
x1 | Bull's Eye Level Kit [EACH] |
10 | K-184 | x1 | Plain Glass Probe Liner Kit, 6ft [EACH] |
11 | K-191 |
x1
|
Nozzle Fittings Kit, 16mm [EACH] |
12 | K-210 | x1 | Type K Thermocouple Simulator Kit [EACH] |
13 | PN-321 | x1 | Angle Indicator [EACH] |
14 | PN-342 |
x12 | Ball Joint Clamp #28 [EACH] |
15 | PN-357 or PN-1278 | x1 | Leak-Free Stack Testing Pump Assembly [EACH] |
16 |
PN-364 or PN-876 |
x1 | Probe Heater, 6' [EACH] |
17 | PN-379 | x1 | Umbilical Cable Adapter Assembly [EACH] |
18 | PN-380 | x1 | Impinger Box Assembly, Large [EACH] |
19 | PN-385 | x3 | Bottle, LDPE, Wide Mouth, 1 Liter [EACH] |
20 | PN-388 | x1 | Barometer [EACH] |
21 | PN-389 |
x2 | Wash Bottle, LDPE, 250ml [EACH] |
22 | PN-391 | x1 | Graduated Cylinder, Glass, 100ml [EACH] |
23 | PN-395 | x1 | Glass Fiber Filters, Round, 82mm [EACH] |
24 | PN-401 | x1 | Probe Brush Head, PTFE [EACH] |
25 | PN-403 | x1 | Probe Brush Extension, 6ft [EACH] |
26 | PN-412 |
x2 | Funnel, PE [EACH] |
27 | PN-418 | x1 | Tweezer, SS [EACH] |
28 | PN-493 |
x4 | Glass Impinger Bottle, 500ml [EACH] |
29 | PN-605 |
x3 | Impinger Connector, glass [EACH] |
30 |
PN-639 |
x3 | Petri Dish, Glass, 3" [EACH] |
31 | PN-953 | x1 | Manual, MREK Series Console [EACH] |
32 |
PN-1381 |
x1 | Probe Sheath, 6ft [EACH] |
33 | PN-1379 | x1 | Umbilical Cable Assembly, 100ft, w/o Orsat line [EACH] |
34 | PN-1272 or PN-1342 |
x1 | MREK 504 Meter Console Assembly [EACH] |
35 | PN-1279 or PN-1382 | x1 | MKOR Heater Box and Box Extender Assembly [EACH] |
36 | PN-773 | x5 | Calibration of Critical Orifice [EACH] |
37 | PN-1483 | x1 | Calibration of Dry Gas Meter [EACH] |
38 | PN-1484 | x1 | Calibration of Temperature Sensor [EACH] |