S-28 USEPA method 5 sampling train schematic a1

USEPA Method 5 Basic Set

$14,098.00

Meets or exceeds the following methods/laws/requirements:

US EPA Method 5:

Section 6.1 (Sample Collection) but excluding section 6.1.3: Gas Density Determination Equipment (Gas Analyzers) and chemicals (silica gel, deionized distilled water, ice, acetone)

Section 6.2 (Sample Recovery - except balances).

Product Description

Start isokinetic sampling (smoke-stack testing) using US EPA Method 5 (Particulate Matter or Dust) upon unpacking. This set uses Aer Sampling’s Standard Configuration where the full-length heating box—MKOR^TM Heater Box (Hot Box), the Box Extender (Riser Box) and the Impinger Box (Cold Box) is hung onto a monorail and move in or out the porthole of the chimney/stack, while traversing the smoke-stack.

Other Applicable Documents:
N.A.

Product Specifications

Minimum porthole inside diameter needed: ~4 in. (10 cm)

Voltages:
100-127 V / 60 Hz --- S-48
220-240 V / 50 Hz --- S-28

Other Information

Consider buying additional glassware in case of accidental breakage during sampling.
Consider buying transport cases if you will be traveling too far from your main offices.

All our product sets come with a Guaranteed-Complete promise. And all our products come with a one-year warranty against manufacturing defects and one-month technical support for free. Please refer to our Frequently Asked Questions (FAQs) page for more details.

-----

Information presented here is subjected to Aer Sampling Group's terms and conditions.
In case of discrepancy between English version and the non-English version, the English version shall prevail.
Doc ID: AERHQWW-s-48-en
Last revised (Excluding prices): 0; 03.02.21

Catalog ID	Catalog/Product Name	Obsolete Catalog IDs
S-48	100-127V USEPA Method 5 Basic Set	-
S-28	220-240V USEPA Method 5 Basic Set	US-M5

-----

Bill of Materials (BOM)

What does this product contain? (r6/r13):

The following items are included. Click the Catalog ID below to view individual components of this product.

S/N	Catalog ID	Quantity	Item Name
1	K-150	x1	Critical Orifice Kit [EACH]
2	K-151	x1	Double "L" Connector with Thermocouple Assembly Kit [EACH]
3	K-156	x1	Glass Filter Holder Kit, 3" [EACH]
4	K-157	x1	Glass Nozzles Kit [EACH]
5	K-164	x1	Nozzle Brush Kit [EACH]
6	K-171	x1	Greenburg Smith Impinger Insert Kit [EACH]
7	K-173	x3	Plain Impinger Insert Kit [EACH]
8	K-180	x1	Cyclone Bypass, glass, with o-ring Kit [EACH]
9	K-182	x1	Bull's Eye Level Kit [EACH]
10	K-184	x1	Plain Glass Probe Liner Kit, 6ft [EACH]
11	K-191	x1	Nozzle Fittings Kit, 16mm [EACH]
12	K-210	x1	Type K Thermocouple Simulator Kit [EACH]
13	PN-321	x1	Angle Indicator [EACH]
14	PN-342	x12	Ball Joint Clamp #28 [EACH]
15	PN-357 or PN-1278	x1	Leak-Free Stack Testing Pump Assembly [EACH]
16	PN-364 or PN-876	x1	Probe Heater, 6' [EACH]
17	PN-379	x1	Umbilical Cable Adapter Assembly [EACH]
18	PN-380	x1	Impinger Box Assembly, Large [EACH]
19	PN-385	x3	Bottle, LDPE, Wide Mouth, 1 Liter [EACH]
20	PN-388	x1	Barometer [EACH]
21	PN-389	x2	Wash Bottle, LDPE, 250ml [EACH]
22	PN-391	x1	Graduated Cylinder, Glass, 100ml [EACH]
23	PN-395	x1	Glass Fiber Filters, Round, 82mm [EACH]
24	PN-401	x1	Probe Brush Head, PTFE [EACH]
25	PN-403	x1	Probe Brush Extension, 6ft [EACH]
26	PN-412	x2	Funnel, PE [EACH]
27	PN-418	x1	Tweezer, SS [EACH]
28	PN-493	x4	Glass Impinger Bottle, 500ml [EACH]
29	PN-605	x3	Impinger Connector, glass [EACH]
30	PN-639	x3	Petri Dish, Glass, 3" [EACH]
31	PN-953	x1	Manual, MREK Series Console [EACH]
32	PN-1381	x1	Probe Sheath, 6ft [EACH]
33	PN-1379	x1	Umbilical Cable Assembly, 100ft, w/o Orsat line [EACH]
34	PN-1272 or PN-1342	x1	MREK 504 Meter Console Assembly [EACH]
35	PN-1279 or PN-1382	x1	MKOR Heater Box and Box Extender Assembly [EACH]
36	PN-773	x5	Calibration of Critical Orifice [EACH]
37	PN-1483	x1	Calibration of Dry Gas Meter [EACH]
38	PN-1484	x1	Calibration of Temperature Sensor [EACH]

We Also Recommend

USEPA Method 7 (Add-on) Set

USEPA Method 6 (Add-on) Set --- S-44

USEPA SW-846 VOST Method 0031 (Add-on) Set

S-21 USEPA method 29 sampling train schematic a1

USEPA Method 29 (Add-on) Set --- S-21

S-22 USEPA method 26a sampling train schematic a1

USEPA Method 26A (Add-on) Set --- S-22