English  Español  ภาษาไทย  Bahasa Indonesia 
S-26 USEPA method 5i sampling train schematic a1

USEPA Method 5i (Add-on) Set --- S-26

  • $444.00


Print PDF Email

Meets or exceeds the following methods/laws/requirements:

US EPA Method 5i:

Section 6.1 (Sampling) but excluding chemicals (silica gel, deionized distilled water, ice, acetone etc.)
Section 7.1.1 (Filters)


Product Description

Start isokinetic sampling (smoke-stack testing) using US EPA Method 5i (Low Level Particulate Matter) upon unpacking. This sampling method is effective to measure particulate matter of 50 mg or less, from a flue gas emitted by a stationary sources of air pollution.

This set can be used in either the Standard Configuration or Flexible Configuration sampling train:

  • Aer Sampling’s Standard Configuration is where the full-length heating box—MKORTM Heater Box (Hot Box), the Box Extender (Riser Box) and the Impinger Box (Cold Box) is hung onto a monorail and move in or out the porthole of the chimney/stack, while traversing the smoke-stack.
  • Aer Sampling’s Flexible Configuration is when the Box Extender (Riser Box) is removed from the MKORTM Heater Box (Hot Box) to reduce the weight and size of the Hot Box. The Impinger Box (Cold Box) is placed on the ground or smoke-stack platform separately from the sampling train that is traversing the smoke-stack. No longer need to move this Cold Box when moving in and out of the sampling porthole.

Requires the USEPA Method 5 Basic Set (which uses Aer Sampling’s Standard Configuration) to use this add-on set.
To use Aer Sampling’s Flexible Configuration, please purchase the USEPA Method 5 Flexible (Add-on) Set.

Other Applicable Documents:
N.A.


Product Specifications

Minimum porthole inside diameter needed: ~4 in. (10 cm) 

-----
Click on the links in the BOM tables below to view the specifications of individual components of this product.


Other Information

All our products come with a one-year warranty against manufacturing defects and one-month technical support for free. Please refer to our Frequently Asked Questions (FAQs) page for more details.



-----

Information presented here is subjected to Aer Sampling Group's terms and conditions. 
In case of discrepancy between English version and the non-English version, the English version shall prevail.
Doc ID: AERHQWW-s-26-en
Last revised (Excluding prices): 0; 06.09.21
Obsolete Catalog ID: US-M5I

 

-----

Bill of Materials (BOM)

What does this product contain? (r0):

The following items are included. Click the Catalog ID below to view individual components of this product.

S/N Catalog ID Quantity Item Name
1 PN-329 x1 Low Dust Filter Holder Assembly [EACH]
2 PN-394 x1 Glass Fiber Filters, Round, 47mm [EACH]

 

What does this product need to work? (r0):

Items not included in this set/kit but are needed to make this set/kit works. We assume you already have the items below 

S/N Catalog ID Quantity Item Name
1 S-28
S-48
x1 USEPA Method 5 Basic Set [EACH]