PN-356 mrek metering console a1

MREK 502 Meter Console Assembly

  • $4,505.00


Specifications

Versatile metering console (metric) for use in most sampling trains. Comes with ISO/IEC 17025 accredited calibration certificate.

 

Material/Measurements/Description:

Meets or exceeds requirements of relevant texts/methods/requirements.

Dry gas meter:
Accurate to ±1.5% in the range of 0.0042m3/min to 0.0417m3/min
Working temperature of -25 C to 55 C

Double column inclined manometer:
Range of 0 to 250mmH2O
Inclined resolution of 0.5mmH2O
Vertical resolution of 2mmH2O

Temperature control: Analog; Solid-state power relay

Temperature sensor (Type K):LED display (red); External 7-channel selector switch -105 C to 1372 C

Vacuum gage: 0 to 30inHg

Umbilical connections:
Pitot line: 1/4" quick connects
Sample line: 1/2" quick connects
Electrical: 5 conductors circular connector
Thermocouple: Type K, standard

Power: 240V/50Hz or 110V/60Hz

Dimensions:
Length: 50cm
Depth/Width: 30cm
Height: 50cm
Weight: 21kg

 

Purpose and how to use? Relationship to other components?

The MREKTM502 Meter Console is where all the sensors/gages/meters are housed in. These sensors/gages/meters measure temperatures, differential pressures, vacuum, gas velocities and all other required parameters to sample flue gas isokinetically.
TheMREKTM502 Meter Console is metric and is most suitable for USEPA (United States of America, Environmental Protection Agency) methods/procedures/requirements although it usually fulfills requirements from other jurisdictions as well.
Just connect theMREKTM502 Meter Console to other component products to start sampling. Please refer to the definition of "sample line" as stated below to know what are those other components

 

Relevant texts/methods/requirements:

Section 6.1.1.9 (Metering System), USEPA Method 5
Page 3-14 (Meter Box Construction), APTD-0581:Construction Details of Isokinetic Source Sampling Equipment
Section 6.2.7 (Gas-metering devices), ISO 9096:2003(E)

 

Additional ordering/shipping procedures:

Pump and items needed (Critical Orifice Set, Thermocouple Simulator, Angle Indicator and Bull's Eye Level) for you to calibrate the MREKTM502 Meter Console sold separately.

The following certificates/reports will be issued:

Leak check report (MREKTM502 Meter Console)

Calibration certificate for dry gas meter (Y) and orifice meter/tube (Delta H@)

Calibration certificate for temperature sensor

Additional leak check reports (on pitot line and sample line) will be issued when theMREKTM502 Meter Console is purchased as part of some of Aer Sampling's Sampling Method Sets (e.g. US-M5):

Pitot line refers to the products needed to measure differential pressure (Delta P):

MREKTM502 Meter Console, Umbilical Cord, Combination Probe Set/Sheath

Sample line means those products where the sampled flue gas from the stack/chimney comes into contact with:

Standard Configuration: MREKTM502 Meter Console, Umbilical Cord, various glassware including Filter Holder, MKORTMHeater Box andCombination Probe Set.

Flexible Configuration: MREKTM502 Meter Console, Umbilical Cord, various glassware including Filter Holder, MKORTMHeater Box, Unheated Sampling Line (Flexible) andCombination Probe Set.

Handy Configuration:MREKTM502 Meter Console, Umbilical Cord, various glassware, KrisTMHeater (Handy), Unheated Sampling Line (Handy) andCombination Probe Set.

Sample line products are also the same as those used when measuring moisture content by condensation.

Additional leak checks reports will be issued only when the Sampling Method Set purchased includes all the required component products.

Please refer to the FAQs page for shipping and other charges.

--

Information presented here is subjected to Aer Sampling Group's terms and conditions.
Doc ID: AERHQWW-pn-870-en
Last revised (Excluding prices): 0; 5.10.18

Catalog ID Previous (Obsolete) Catalog ID
PN-870 -
PN-356 UM-M502