VOST Glassware Case Assembly --- PN-1053
Meets or exceeds the following methods/laws/requirements:
To hold glassware and the sampling probe in position and is used in Aer Sampling’s USEPA SW-846 VOST Method 0031 (Add-on) Set.
This case is designed to accommodate two vertical condensers, a water trap, a silica gel trap, and a set of four sorbent tubes during sampling. It also allows the circulation of an ice bath through the vertical condensers, ensuring that the gas stream temperature is cooled to or below 20ºC (68ºF) before the sampling gas enters the sorbent tubes.
This item is assembled after the sampling probes and before the metering systems (e.g., umbilical cable, metering console) in your sampling train.
This product connects to the following (non-exhaustive) list of products from Aer Sampling:
- PN-731 --- Miniature Probe with Heater
- PN-967 --- Handy Power Box
- Aer Sampling’s VOST Glassware
Casing body only (Length x Width x Height):
English (inch): ~14 x 6 x ~20
Metric (cm): 37 x ~15 x 50
Weight (Gravitational): lbs / kg
Packing dimensions (Length x Width x Height):
All our products come with a one-year warranty against manufacturing defects and one-month technical support for free. Please refer to our Frequently Asked Questions (FAQs) page for more details.
Information presented here is subjected to Aer Sampling Group's terms and conditions.
In case of discrepancy between English version and the non-English version, the English version shall prevail.
Doc ID: AERHQWW-pn-1053-en
Last revised (Excluding prices): 0; 01.15.21
Obsolete Catalog ID: -
We Also Recommend
© 2012-2023 Aer Sampling --- aersampling.com (aers.co)